Bond Series 40-A / Series 41-A Medium Heavy Duty Casters
Maximum Capacity to 1500 pounds per caster.

FEATURES & BENEFITS
Construction: Heavy gauge steel is cold-forged to provide strong, rigid top plate and cup assembly.
Swivel Bearing: Hardened and polished steel balls in coined and hardened upper and lower raceways assure easy swivel action and long service life.
Fork: Deep formed legs for strength, welded to cup.
King Bolt: Heavy duty steel bolt with threaded lock nut.
Axle: Threaded axle bolt locks in place. A hardened and ground sleeve fits over the axle and is held rigid between the legs for exceptional rigidity and strength.

Applications: factory, commercial and institutional operations

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Bond Series 46-A / 47-A Light Medium and Medium Duty Casters
Maximum Capacity to 575 pounds per caster.

FEATURES & BENEFITS
Construction: Heavy gauge steel is cold-forged to provide strong, rigid top plate and cup assembly.
Swivel Bearing: Hardened and polished steel balls in a smoothly coined and hardened upper and lower raceway assure easy swivel action and long service life.
Fork: Legs are formed for strength and continuously welded to the cup.
King Pin: Steel rivet, orbitally formed to provide equal strength at both ends.
Axle: Threaded bolt secured with lock nut.

Applications: institutional and commercial operatons as well as many light industrial uses.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Bond Series 50-A / 51-A Light, Light Medium Casters
Maximum Capacity to 650 pounds per caster.


FEATURES & BENEFITS
Construction: Heavy gauge steel deep formed for maximum strength.
Swivel Bearing: Hardened and polished steel balls in a deep formed race designed not only to carry the load but also to absorb side thrust between the deeply embossed outer apron of the base and formed inner flange of the fork.
Fork: Legs and cup are one-piece pressed steel construction.
King Pin: Steel rivet, orbitally formed to provide equal strength at both ends.
Axle: A square neck under the head of the axle fits ina square hole in the leg of the fork which prevents the axle from turning.

Applications: Light industrial use and a wide variety of institutional and commercial applications--dollies, laundry and food handling carts, light equipment and other mobile requirements.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Bond Series 78-A / 79-A Super Duty
Maximum Capacity to 6000 pounds per caster.

FEATURES & BENEFITS
Construction: Heavy section steel plate for both top plate and yoke base, precision machined for precision unit load bearing.
Swivel: Main load bearing is a large diameter self-contained precision roller bearing. Secondary load bearing is a tapered roller bearing.
Fork: Wide, deep formed legs continuously welded both inside and outside.
King Bolt: High strength steel bolt with slotted adjusting nut and cotter pin.
Axle: High strength steel, threaded both ends.

Applications: Equipment with high capacitiy demands

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Bond Series 82-A / 83-A
Maximum Capacity to 1500 pounds per caster.

FEATURES & BENEFIT
Construction: Heavy gauge steel palte, machined and welded to provide the rugged construction needed for heavy factory service where uneven floors, metal chips, etc., might be encountered.
Swivel: Precision bearing units are provided for both load bearing and thrust. Bearing units are replaceable.
King Pin: High strength steel bolt with slotted nut and cotter pin.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Bond Bondrelene Injection Molded Polyolefin Wheels

FEATURES & BENEFIT
Bondrelene wheels offer high impact resistance, rolling ease, floor protection, and durability. They are a hard, non-marking, stain resistant wheel with zero water absorption, impervious to grease, oil, gasoline, cooking fts and most acids. They may be steam cleaned. Operating temperature range is 20° to +220°. Bondrelene wheels are available with plain bore or with straight roller bearings.

Applications: The Bondrelene wheel is ideally suited for light, medium and medium heavy duty uses in process industries of all types, laundries, bakeries, meat packing plants, manufacturing plants and countless equipment applications in labs, institutions and warehouses.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com