|
|
|
Payson
760 Swivel - 761 Rigid GENERAL DUTY
FEATURES
GENERAL DUTY
The "760" is an economical, all-purpose caster of single
ball race construction, made of heavy gauge cold-rolled steel. Simplicity
of design renders a combination of quality with low cost.
APPLICATIONS
For equipment in the range of 100 to 1400 lbs. Widely used on furniture
dollies, box and platform trucks, bakery racks, laundry and linen
baskets, and other equipment on which applications require an economical
single ball race caster.
STANDARD ENGINEERING DATA
Large raceways deeply embossed for extra strength and bearing surface.
Hydraulically upset kingpin for thrust absorption.
Relaceable nut and bold axles for 2 through 4" models.
1 5/8" casters have riveted axles.
STANDARD FEATURES/COMPONENTS
Zinc plated.
5/16" shouldered axle for 2 and 2 1/2" models.
3/8" shouldered axle for 3" models.
3/8" straight axle for 4" models with 1/2 x 3/8 x 1 13/16"
spanner bushing.
COMPANION "761" RIGID
The solid, one-piece steel "761" is embossed for extra
strength.
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone: 800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
020 Swivel / 021 Rigid LIGHT DUTY
FEATURES
An
ICM standard. Constructed of cold-rolled steel and embossed for
extra strength, the "020" is a double ball-race caster,
heat-treated for longer wear and greater strength.
APPLICATIONS
For equipment in the load range of 100 to 600 lbs. The "020"
is designed for use on the following equipment: tool carts, food
service trucks, hospital, appliance, office and other portable equipment.
STANDARD ENGINEERING DATA
Larger Diameter Raceways. 3/8" Hydraulically Upset Kingpin.
Heat Treated Wrap-around Brackets.
Vibratory finished means smart, bright appearance.
STANDARD FEATURES/COMPONENTS
Zinc plated. 5/16" shouldered nut and bolt axles for wheel
replacement. Lock nuts for security.
COMPANION "021" RIGID
The solid, one-piece steel "021" is embossed for extra
strength to provide a matching rigid for the "020".
"020" SERIES STEM CASTERS
A wide variety of stem casters in light, medium and heavy duty are
also available.
NSF
CERTIFIED
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
080 Swivel / 081 Rigid series MEDIUM HEAVY
FEATURES
"080" has been especially designed to carry heavy loads
in which a low over-all height and wide tread wheel are essential
ingredients. Construction is of heavy gauge, cold-rolled steel,
double ball bearing design, embossed for additional strength and
style.
STANDARD ENGINEERING DATA
.225 Top Plate.
5/8" Hydraulically Upset Kingpin.
One-piece .149 Wrap-around Bracket Projection welded to .165 Top
Cup.
.149 Bottom Cup.
Case Hardened.
1/2" Axle.
Zinc Plated.
Lubrication Fittings.
3 x 1 13/16" Plexite Phenolic Resin Wheel with Roller or Delrin
Bearing.
COMPANION "081" RIGID
.149 embossed legs welded to a .225 top plate.
NSF CERTIFIED
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
 |
Payson
200 Swivel / 201 Rigid series MEDIUM HEAVY
FEATURES
The "200" is a precision-build swivel caster with two
perfectly aligned swivel raceways. All the cold-formed parts are
made to exacting tolerances from heavy gauge steel and are hardened
for severe service and long wear.
APPLICATIONS
For equipment in the load range of 500 to 4000 lbs. A large selection
of wheels makes it adaptable to a variety of industrial and institutional
equipment. Widely used on warehouse trucks, refuse containers, linen
carts, etc.
STANDARD ENGINEERING DATA
.225 Top Plate.
One-piece .187 Wrap-around Bracket Projection welded to .165 Top
Cup.
5/8" Hydraulically Upset Kingpin.
.149 Bottom Cup.
Case Hardened.
STANDARD FEATURES/COMPONENTS
Zinc plated vibratory finish. Lubrication fittings for swivel and
wheel. 1/2" nut and bolt axles. 3/4 x 1/2 x 2 5/16" hardened
spanners.
COMPANION "201" RIGID
.149 embossed legs welded to a .225 top plate.
NSF CERTIFIED
For more detailed information on a particular caster, or if you
have a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
290 Swivel / 291 Rigid series HEAVY MEDIUM
FEATURES
The "290" offers the ultimate in a heavy medium duty cold-forged
steel caster. Extraordinary design features allow for punishing
service under severe operating conditions.
APPLICATIONS
For equipment in the load range of 1500 to 5000 lbs. Large wheel
selection allows for a variety of general applications. Especially
suited for rugged conditions.
STANDARD ENGINEERING DATA
3/4" Hydraulically Upset Kingpin.
5/16" thick Cold Forged Top Plate.
1/4" Cold-forged Top Cup with 5/16" Balls.
1/4" Thick Cold-forged Bottom Cup with 5/16" Balls.
.194 Embossed Legs welded to Top Cup.
All Parts Case Hardened.
STANDARD FEATURES/COMPONENTS
Zinc plated finish. 1/2" nut and bolt axles. 3/4 x 1/2 x 2
5/16" hardened spanners. Lubrication fittings for swivel and
wheel.
COMPANION "291" RIGID
The "291" has thick, embossed legs welded to a husky top
plate.
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
300 Swivel / 301 Rigid series HEAVY DUTY
FEATURES
A rugged cold-forged caster, the "300" is designed to
withstand severe shock loads while providing a smooth swiveling
action on hardened raceways. A precision top raceway, coined under
extreme pressure, supports the load while a large diameter lower
ball race absorbs the secondary thrust.
APPLICATIONS
For equipment in the 2000 to 6000 lbs. range. Suitable for heavy
industrial and warehousing applications where high shock loads and
severe operating conditions prevail.
STANDARD ENGINEERING DATA
5/16" Cold Forged Top Plate.
1/4" Legs welded to 1/4" Top Cup with 7/16" Balls.
1/4" Bottom Cup with 5/16" Balls.
3/4" Hydraulically Upset Kingpin.
STANDARD FEATURES/COMPONENTS
3/4" nut and bolt axles. 1 x 3/4 x 2 13/16" hardened spanners.
Lubrication fittings for swivel and wheel. Zinc plated.
COMPANION "301" RIGID
1/4" embossed legs welded to a 5/16" top plate.
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
400 Swivel / 401 Rigid series HEAVY DUTY
FEATURES
The
"400" is designed to carry heavy duty loads, even under
severe operating conditions. The hardened swivel components are
constructed of heavy gauge cold-forged steel, formed under extreme
pressure to the most exacting tolerances, thereby assuring smooth
swiveling on mirror-like raceways.
APPLICATIONS
For equipment in the range of 2000 to 8000 lbs. Designed for the
heaviest manual loads, and units drawn occasionally by power. Will
withstand punishing and continuous service, including severe shock
loads.
STANDARD ENGINEERING DATA
5/16" Cold Forged Top Plate.
3/4" Heat-treated Nut and Bolt King Bolt, welded in place.
1/4" Wrap-around Style and fully formed Legs welded to heavy
5/16" contour Base.
STANDARD FEATURES/COMPONENTS
Zinc plated finish. 3/4" nut and bolt axles. 1 x 3/4 x 3 3/8"
hardened spanners. Lubrication fittings for swivel and wheel.
COMPANION "401" RIGID
1/4" embossed legs welded to a 5/16" top plate.
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
600 Swivel / 601 Rigid series HEAVY TIMKEN
FEATURES
The "600" is the ultimate in a super heavy duty caster
design. The watch-like swivel construction is incomparable. Each
cold-forged steel component part is heat-treated for the most severe
operating conditions imaginable. The word "indestructible"
was meant for this Series.
APPLICATIONS
For the most severe applications with capacities up to 14,000 lbs.
Originally designed for the mobile home industry, the "600"
is also ideal for the heaviest manually operated loads and power-driven
equipment.
STANDARD ENGINEERING DATA
1/2" Coined Embossed Cold-forged Top Plate.
1 1/2" King Bolt, welded in place.
Thrust Load carried by 1 1/4" Timken Roller Bearing.
4" Load Bearing Raceway with 1/2" Balls.
3/8" Legs welded on both sides to the Yoke Base.
STANDARD FEATURES/COMPONENTS
Zinc plated finish. 1" axle. 1 1/4 x 1 x 3 3/8" hardened
spanners. Grease fittings in swivel and wheel.
COMPANION "501" RIGID
The "601" has 3/8" embossed steel legs welded on
both sides to a 1/2" top plate.
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
900 Swivel / 901 Rigid series SUPER
HEAVY
FEATURES
Constructed with indestructible features. For units up to 68,000
lbs.
ENGINEERING DATA
3/4" Steel Top Plate.
1 1/2" Welded King Bolt.
7" Sealed type Timken load Raceway.
1 1/2" Tapered Thrust Bearing.
1/2" Embossed Legs welded inside and out to support base.
STANDARD FEATURES/COMPONENTS
1 1/4" axle. 1 1/2 x 1 1/4 x 4 5/8" hardened spanners.
Zinc plated. Lubrication Fittings. Companion Rigids.
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
020-DW DOUBLE WHEEL SERIES LIGHT/MEDIUM
DUTY DUAL WHEEL CASTERS
FEATURES
The purpose of a dual wheel caster is to offer more floor contact
for equipment considered to be top heavy, such as electronic cabinets
or heavy furniture. The combination of a larger surface area and
the low overall height allow these duals to maneuver well in tight
areas and under heavy loads. Scroll down for specifications.
'020-DW' LIGHT DUTY
The two separate and distinct ball races make for the easiest swiveling
possible. Heat treated, with a longer service life. Shouldered axles
are replaceable. Zinc plated.
OPTIONAL EXTRAS:
"WK" Wheel Brake.
Stems are available. Please consult factory. Tread width shown is
a combination of the two wheels. No rigids.
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
Payson
'060-DW' LIGHT MEDIUM DUTY
FEATURES
The "060-DW" double wheel casters provide a wider floor
surface contact and an even larger double ball bearing swivel raceway
design. All parts are hardened for longer wear. Replaceable shouldered
axles. Zinc plated.
OPTIONAL EXTRAS:
Stems are available. Please consult factory. Tread width shown is
a combination of the two wheels. No rigids.
For
more detailed information on a particular caster, or if you have
a question, contact a customer service representative at:
Phone:
800-215-8220
Fax: 800-591-8227
Info@servicecaster.com
|
|
|
