Roll-Master Stem Casters - Series 7

FEATURES
Threaded, Round, Octagon, Hollow King Pin. Light duty institutional or industrial use. Corrosion-resistant zinc finish. Full-drawn steel horn swivel. 2 rows of ball bearings encased in hardened, lubricated raceways. Side brakes and thread guards on request.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Roll-Master Top Plate Casters - Series 15 and 16

FEATURES
Available in nickel or zinc. Light to medium duty institutional or industrial use.
2 rows of ball bearings encased in hardened lubricated raceways.
Strong king pin. Side Brakes on request

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Roll-Master Top Plate Casters - Series 155 and 165

FEATURES
Finish - bright zinc plating. Swivel - double ball bearing. Hardened raceways for extra strength. Dust cover - helps protect swivel bearings. Construction - heavy guage cold rolled steel formed for strength and heat treated. King pin - 1/2" steel rivet. Fork leg spacing 2". 2-3/8" x 3-5/8" top plate.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Roll-Master Stainless Steel Castes- Series S15 and S16

FEATURES
Stainless steel forks and hardware. 2 rows of ball bearings encased in hardened lubricated raceways. Swivel uses a zerk fitting and seals to allow for lubrication. White on request. Brakes available. NSF approved caster. USFDA approved wheels for direct contact with food for human consumption.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Roll-Master Stainless Steel Castes- Series S20 and S21

FEATURES
Stainless steel forks and hardware. 2 rows of ball bearings encased in hardened lubricated raceways. White on request. Brakes available. NSF approved caster. USFDA approved wheels for direct contact with food for human consumption.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Roll-Master Stainless Steel Stem Casters - Series S15

FEATURES
Threaded and found stems

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Roll-Master Top Plate Casters - Series 20 and 21

FEATURES
Rigid casters offer rugged formed steelhorn welded to heavy guage top plate.
Plated finish. Swivel casters offer 2 rows of ball bearings encased in hardened, lubricated raceways. Heavy duty king pin. Plated finish. White wheels on request.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

Roll-Master Top Plate Casters, Heavy Duty Cold Forged- Series 30 and 31

FEATURES
Heavy Duty Cold Forged. Finish - Bright zinc plating. Swivel - Double ball bearing raceway
with large 3-1/4" diameter load race, coined and heat treated for strength. Axle - 1/2" diameter bolt and lock nut. Construction - top plate and yoke base cold forged from 1/4" steel plate. Legs 1/4" steel plate formed and welded to yoke base. King Pin - 3/4" diameter rivet. Optional nut and bolt king pin.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com