TWR Wheels - Molded-on rubber tired cast iron or aluminum center

FEATURES & BENEFITS
Molded-on rubber tired wheels with cast iron or aluminum centers are
available in a complete variety of sizes from 4" to 20" diameter which meet
or add to the sizes listed as standard by the Caster and Floor Truck
Manufacturers Association. The aluminum centers are lighter than iron,
however, the load capacity is the same. Both types are produced under a
trick concept of quality.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com
TWR Heavy Duty Molded-on Rubber tired Wheels

FEATURES & BENEFITS
The Heavy Duty wheels listed below have molded-on rubber tires and extra
heavy cast iron centers designed specifically for the larger bearings and
rough service. The large diameter hubs will accommodate either tapered
roller bearings or large straight roller bearings. All tapered roller bearings are of the sealed type.

N-70 tires are standard; however, these wheels are available with H-90 Neoprene or Static Conductive tires.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com
TWR PUSHEASE Wheels

FEATURES & BENEFITS
Pushease is the distinctive low profile wheel recognized as the industry
standard for "Hi-Capacity" smooth surface material handling. By actual
tests, trucks equipped with PUSHEASE WHEELS required 20% less effort
to begin and sustain movement than those with conventional rubber tired
wheels. It has a cast iron or aluminum center and Low Profile rubber tire. It is designed to combine into one wheel the distinguishing characteristics of
molded-on plastic, and metal wheels. It has the quietness and the smooth
rolling qualities of regular molded-on wheels, the high capacity of plastic
wheels and the economy of metal wheels.

Applications: These wheels should be used only on smooth floors and are
particularly suited to conveyorized systems. They are furnished with roller
bearings and grease fittings for pressure lubrication.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:
Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com
TWR BIG TENN Wheels

FEATURES & BENEFITS
These wheels represent the ultimate in high capacity, durability, and trouble
free performance on trailers having capacities over 8,000 pounds. Press-on
Rubber Tired Wheels consist of a center hub section and a steel rim on
which a rubber tire is vulcanized. The tire with steel rim is pressed over the
center hub section and can be removed and replaced when tires are worn.
The thicker rubber tires have greater resiliency then conventional molded-on
wheels.

Applications: Heavy Duty Trailers

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com
TWR Tenn-A-Thane Wheels

FEATURES & BENEFITS
Tenn-A-Thane wheels have a first quality polyurethane tire (shore "A" 90
hardness) permanently bonded to a metal center. They have a cast iron or
cast aluminum center designed around the rated capacity and accurately
machined for roller bearing with hub lengths to fit all standard casters.
Tenn-A-Thane wheels are equipped with high capacity roller bearings with
hardened rollers sand hardened outer races, pressure lubrication fittings and
grease grooves for proper bearing lubrication.

Application: Industrial

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com
TWR Tenn-A-Flex Wheels

FEATURES & BENEFITS
Tenn-A-Flex combines the advantages of pneumatic and semi-pneumatic
wheels and eliminate the disadvantages of both. The life expectancy of
this wheel cannot be predicted since they are practically indestructible. The
wheel looks like a pneumatic tired wheel; it rolls as smoothly as a pneumatic
tired wheel coupled with the durability of a molded-on. The Tenn-A-Flex is
a solid tire (puncture proof) permanently bonded onto a cast aluminum
center. It is designed to replace the industrial pneumatic and
semi-pneumatic wheels allowing the easy ride of the pneumatic and the
durability of the molded-on-tire at a price slightly higher than a molded-on.
Applications: Medium Capacity for appliance trucks, bottlers trucks,
industrial trailers, baggage wagons and aircraft ground support carts.

For more detailed information on a particular caster, or if you have a question, contact a customer service representative at:

Phone:  800-215-8220
Fax:      800-591-8227
Info@servicecaster.com

 


 
 
 
© Copyright 2003/2005 Service Caster Corporation. All rights reserved.